Rules of root locusHere, we will discuss the six basic rules required to plot a root locus. We will also discuss an example that will help us to implement the rules easily. Rule Number 1We know that the root of the equation can be real or complex or a combination of both. The root locus is generally symmetric about the real axis. Thus, the plot needs to be symmetric about the real axis of the splane. Rule Number 2The transfer function of the system is generally represented by G(s)H(s), where H(s) is the feedback path. Let us suppose the openloop transfer function to be the same G(s)H(s) and the poles and zeroes are P and Z. There are two conditions where the poles can be greater than the number of zeroes, or the number of zeroes can be greater than the number of poles in the given characteristic equation. Let the number of branches in the root locus is N. Both the cases arise when we plot the root locus. The default conditions are given for each case that helps in determining the number of branches terminating or approaching infinity. Case 1: P > Z In the above case, we assume that the number of branches in the root locus will equal the number of openloop poles. It is because the numbers of poles are greater here. (N = P) Branches, in this case, will start from the location of the openloop poles. Here, out of a number of branches at P, the Z number of branches will terminate at the location of openloop zeroes. The remaining branches (P  Z) will approach infinity. For example, Let P = 3, and Z = 1 Then, The number of root locus branches = 3 = no. of poles P  Z = 3  1 = 2 It means that 3 branches will start from the location of open loop poles No. of branches terminating at the open loop zero location = 1 No. of branches approaching to infinity = P  Z = 2 Case 2: Z > P In the above case, we assume that the number of branches in the root locus will be equal to the number of open loop zeroes. It is because the numbers of zeroes are greater here. (N = Z) Branches in this case will terminate at the finite location of the open loop zeroes. Here, out of number of branches at Z, the P number of branches will start at the location of open loop poles. The remaining branches (Z  P) will approach to finite zeroes originating from the infinity. For example, Let P = 1, and Z = 3 Then, The number of root locus branches = 3 = no. of zeroes Z  P = 3  1 = 2 It means that 1 branch will start from the location of open loop poles No. of branches terminating at the finite open loop pole location = 3 = all the root locus branches No. of branches originating from infinity = Z  P = 2 Rule Number 3A point on the root locus is said to exist if the sum of the open loop poles and zeroes on the real axis towards the right hand side is odd with respect to that point. For example, Let poles be 2 and 4, and zeroes are 1 and 3. We need to find that points 2.2 and 3.4 lies on the root locus or not. We know that 2.2 lies between 2 and 3, while point 3.4 lies between 3 and 4. We know that 2.2 lie between 2 and 3, while point 3.4 lies between 3 and 4. Point 2.2: At point 2.2, the sum of poles and zeroes on the righthand side is 2, i.e. 1 pole and 1 zero. It means that the sum is even. According to rule number 3, the sum should be odd. Hence, point 2.2 does not lie on the root locus. We can also say that any point between 2 and 3 will not lie on the root locus. Point 3.4: At point 3.4, the sum of poles and zeroes on the righthand side is 3, i.e. 1 pole and 2 zeroes. It means that the sum is odd. According to rule number 3, the sum should be odd. Hence, point 3.4 lie on the root locus. We can also say that any point between 3 and 4 will lie on the root locus. The area of the root locus between the points is shown below: Here, orange line represents the area where root locus lies. Let's consider an example for better understanding. Example: G(s)H(s) = K(s + 1)(s + 4)/ s(s + 3)(s + 5). Find on which sections of the real axis, the root locus exists. Solution: We know that the denominator signifies the poles, and the numerator signifies the zeroes. Thus, 0, 3, and 5 are the poles, and 1 and 4 are the zeroes per the given transfer function. It means that there are 3 poles and 2 zeroes. These poles and zeroes on the real axis will appear as: According to rule number 3,
Thus, the line marked with orange depicts the sections where the root locus exists. It is shown below: Rule Number 4We have already discussed that (P  Z) provides the number of branches approaching infinity for the given transfer function. The information about such branches approaching infinity is defined under rule number 4, known as asymptotes. The angle of such asymptotes is given by: = (2q + 1)180 / P  Z Where, q = 0, 1, 2, 3, 4 ... (P  Z  1) These are always symmetric about the real axis. Rule Number 5Rule number 4 describes the guidelines or information about the branches approaching infinity, known as the asymptotes. But, the angles are insufficient to plot the root locus, and the location of such branches in the splane is equally important, defined by rule number 5. Centroid is a point where the asymptotes intersect at a common point on the real axis. It can be calculated as: Note: The value of the centroid is always real, which can be positive or negative. It can be a part of root locus or sometimes not.Rule Number 6The last rule is the breakaway point. It is also a point on the root locus where multiple roots of the given equation occurs. It is calculated for a specific value of system gain K. Or It can be defined as a point on the root locus where two or more roots occur for a particular value of K. The root locus branches always leave breakaway points at an angle of 180/n. Where, N = number of branches approaching at the breakaway point. The value of the angle can be positive or negative. Let's discuss some predictions about the existence of the breakaway points:
The above transfer function has two poles at 0 and 3. According to rule number 3, the point on the section between 0 and 3 (for example, point 2.2) has one pole and no zero on the righthand side. It signifies that the sum of zeroes and poles is 1, i.e. odd. Thus, the section between 0 and 3 exists of the root locus. Hence, there must exist a minimum of one breakaway point in between them.
Next TopicPolar plot
